South Metal Furniture Factory

Contact information
National service hotline:0086-20-34739116

South Metal Furniture Factory
Mr.Watson Wang
Tel: 0086-20-34739116
Email: south-furniture@163.com
Address: 14# Minying Street 2nd,Fuchong Industrial Zone,Shawan Town,Panyu District,Guangzhou,China

How to accept customized office furniture

Source:   Release time:2017-08-14   Click on the quantity:277

How to accept customized office furniture?

Custom office furniture has the individuality outstanding advantage, receives many customer's affection. However, the following points should be paid attention to: 

Look at the appearance. Because decorate furniture to want with other carpentry to make the color, texture, design and so on collocation is harmonious, so, their decorative surface material, paint technology and so on basically same. Inspect the quality that decorates furniture appearance and inspect the appearance quality of the door window is similar outside. It is mainly to see whether the surface paint film is smooth, bright, have no flow, bubble, wrinkles and other quality defects; Also see the color difference of the decoration panel is large, the pattern is consistent, have the corrosion point, the dead knot, the broken remnant. 

Watch the craft. The furniture of office furniture is fine and fine, can look from the combination part, look furniture each member of the connection point of the rationality and firm degree. If a piece of furniture is a combination, its hardware fittings should be of high quality, the density of hardware itself determines the overall density of furniture. Integral structure furniture, each join point, include horizontal, perpendicular connection point must close, cannot have aperture, cannot loosen. Drawers and cabinet doors should be open and flexible, and return correct. The door of glass door should be polished and neat, open and close flexibly, unbroken, scratches, four corners symmetry, and the correct position of the hand. The installation of various plug Angle, pressure bar and slide way should be correct, firm and flexible. 

Look at the structure. Check the structure of office furniture is reasonable, the frame is correct, firm. Gently push the furniture with your hand and if it wobbles or creaks, the structure is shaky. To check the verticality of the furniture, the vertical direction error should be less than 1.5mm when the length of the diagonal line is greater than one meter. The error should be below 1 millimeter when less than 1 meter. Also check the warping degree of it: when the length of the diagonal line is greater than 1.4 meters, the warping degree should be less than 2 mm, and the warp should be less than 0.5mm when the diagonal length is less than 0.7 meters. 

Look at the size. Furniture not only wants beautiful, more important is practical. Whether the dimension of furniture accords with the principle of human body engineering, whether accord with the size of regulation, decide the furniture to use to be convenient or not.

Hot labels:
South Metal Furniture Factory
Contact information

South Metal Furniture Factory
Mr.Watson Wang
Tel: 0086-20-34739116

Mobile:0086-189-2619-1041
 Email: south-furniture@163.com
Address: 14# Minying Street 2nd,Fuchong Industrial Zone,Shawan Town,Panyu District,Guangzhou,China

focus ous
Scan attention
Copyrights©2017 South Metal Furniture Factory All Rights Reserved ICP Record number: Guangdong ICP prepare 11112